索引分片移动 集群数据维护操作
索引创建
# curl -XPOST "http://ESnode:9200/man'
# curl -XPUT "http://ESnode:9200/man/_settings' -d '{
"index.routing.allocation.include.zone" : "zone_one"
}'
第一条命令是创建man索引;
第二条命令是发送到_settings REST端点,用来指定这个索引的其他配置信息。
我们将index.routing.allocation.include.zone属性设置为zone_one值;
就是我们所希望的把man索引放置到node.zone属性值为zone_one的ES集群节点服务器上。
- 同样对woman索引我们做类似操作:
# curl -XPOST "http://ESnode:9200/woman'
# curl -XPUT "http://ESnode:9200/woman/_settings' -d '{
"index.routing.allocation.include.zone" : "zone_two"
}'
不同的是,这次指定woman索引放置在node.zone属性值为zone_two的ES集群节点服务器上
最后我们需要将katoey索引放置到上面所有的ES集群节点上面,配置设置命令如下:
# curl -XPOST "http://ESnode:9200/katoey"
# curl -XPUT "http://ESnode:9200/katoey/_settings" -d '{
"index.routing.allocation.include.zone" : "zone_one,zone_two"
}'
分配时排除节点
跟我们上面操作为索引指定放置节点位置一样,我们也可以在索引分配的时候排除某些节点。 参照之前的例子,我们新建一个people索引,但是不希望people索引放置到zone_one的ES集群节点服务器上,我们可以运行如下命令操作:
- 根据zone
# curl -XPOST "http://EScode:9200/people"
# curl -XPUT "http://EScode:9200/people/_settings" -d '{
"index.routing.allocation.exclude.zone" : "zone_one"
}'
请注意:
在这里我们使用的是index.routing.allocation.exclude
.zone属性
而不是index.routing.allocation.include
.zone属性。
使用IP地址进行分配配置
除了在节点的配置中添加一些特殊的属性参数外,我们还可以使用IP地址来指定你将分片和副本分配或者不分配到哪些节点上面。 为了做到这点,我们应该使用_ip属性,把zone换成_ip就好了。 例如我们希望lucky索引分配到IP地址为10.0.1.110和10.0.1.119的节点上,我们可以运行如下命令设置:
# curl -XPOST "http://ESnode:9200/lucky"
# curl -XPUT "http://ESnode:9200/lucky/_settings" -d '{
"index.routing.allocation.include._ip" "10.0.1.110,10.0.1.119"
}'
- 排除指定IP
curl -XPUT http://EScode:9200/indexName/_settings -d
'{ "index.routing.allocation.exclude._ip": "1.1.1.1,1.1.1.2"}'
取消配置值配置为: “none” 即可
集群范围内分配
- 除了索引层面指定分配活着排除分配之外(上面我们所做的都是这两种情况),我们还可以指定集群中所有索引的分配。
- 例如,我们希望将所有的新索引分配到IP地址为10.0.1.112和10.0.1.114的节点上,我们可以运行如下命令设置:
# curl -XPUT "http://ESnode:9200/_cluster/settings" -d '{
"transient" : {
"cluster.routing.allocation.include._ip" "10.0.1.112,10.0.1.114"
}
}'
- 排除指定IP
curl -XPUT http://EScode:9200/_cluster/settings -d '
{
"transient" : {
"cluster.routing.allocation.exclude._ip" : "1.1.1.1,1.1.1.2"
}
}'
集群级别的控制还有transient和persistent属性
每个节点上分片和副本数量的控制
- 除了指定分片和副本的分配,我们还可以对一个索引指定每个节点上的最大分片数量。
- 例如我们希望ops索引在每个节点上只有一个分片,我们可以运行如下命令:
curl -XPUT "http://ESnode:9200/ops/_settings" -d '
{
"index.routing.allocation.total_shards_per_node" : 1
}'
这个属性也可以直接配置到elasticsearch.ym配置文件中,或者使用上面命令在活动索引上更新。 如果配置不当,导致主分片无法分配的话,集群就会处于red状态。
手动移动分片和副本
接下来我们介绍一下节点间手动移动分片和副本。可以使用ElasticSearch提供的_cluster/reroute REST端点进行控制,能够进行下面操作:
- 取消对分片的分配
- 强制对分片进行分配
- 移动分片
将一个分片从一个节点移动到另外一个节点
假设我们有两个节点:es_node_one和es_node_two,ElasticSearch在es_node_one节点上分配了ops索引的两个分片,我们现在希望将第二个分片移动到es_node_two节点上。可以如下操作实现:
# curl -XPOST "http://ESnode:9200/_cluster/reroute' -d '{
"commands" : [ {
"move" : {
"index" : "ops",
"shard" : 1,
"from_node" : "es_node_one",
"to_node" : "es_node_two"
}
}]
}'
我们通过move命令的index属性指定移动哪个索引,通过shard属性指定移动哪个分片,
最终通过from_node属性指定我们从哪个节点上移动分片,
通过to_node属性指定我们希望将分片移动到哪个节点。
取消分配
如果希望取消一个正在进行的分配过程,我们通过运行cancel命令来指定我们希望取消分配的索引、节点以及分片,如下所示:
curl -XPOST "http://ESnode:9200/_cluster/reroute" -d '{
"commands" : [ {
"cancel" : {
"index" : "ops",
"shard" : 0,
"node" : "es_node_one"
}
} ]
}'
运行上面的命令将会取消es_node_one节上ops索引的第0个分片的分配
分配分片
除了取消和移动分片和副本之外,我们还可以将一个未分配的分片分配到一个指定的节点上。 假设ops索引上有一个编号为0的分片尚未分配,并且我们希望ElasticSearch将其分配到es_node_two上,可以运行如下命令操作:
curl -XPOST "http://ESnode:9200/_cluster/reroute' -d '{
"commands" : [ {
"allocate" : {
"index" : "ops",
"shard" : 0,
"node" : "es_node_two"
}
} ]
}'
一次HTTP请求包含多个命令
我们可以在一次HTTP请求中包含多个命令,例如:
curl -XPOST "http://ESnode:9200/_cluster/reroute" -d '{
"commands" : [
{"move" :
{"index" : "ops",
"shard" : 1,
"from_node" : "es_node_one",
"to_node" : "es_node_two"
}
},
{"cancel" :
{"index" : "ops",
"shard" : 0,
"node" : "es_node_one"}
}
]
}'